Cockroaches Inspire Tiny Robots that Fly, Walk, Swim, Dive

Cockroaches Inspire Tiny Robots that Fly, Walk, Swim, Dive Cockroaches Inspire Tiny Robots that Fly, Walk, Swim, Dive Cockroaches Inspire Tiny Robots that Fly, Walk, Swim, DiveCockroaches always seem to find a way to survive, no matter the situation they face. Inspired by that perseverance and ingenuity, engineers at Harvard Universitys Wyss Institute decided to base an aquatic microrobot on the insects ability to overcome most odds.Many microrobots can either walk or fly, but this tiny bot can also land and walk on water, and even dive below its surface, much like a roachThe addition of aquatic features to Harvards Ambulatory Microrobotalso called HAMRadds a new dimension to how microrobots can be used in search-and-rescue operations and other dangerous or complex applications. The highly publicized rescue of a youth sports team in Thailand earlier this year is just one recent example of the difficulty of working in amphibious environments.Harvards cockroach-inspired microrobot is a n early prototype of bots that could help in such operations. In case of a storm or tsunami, we need robots to work both on the surface and underwater, said Kevin Chen, a fellow at Harvard and part of the team that developed the robot.Equipped with two actuators, HAMRs legs are designed mimicking the joints of real cockroaches.Read mora The Moral Beauty of a Disobedient RobotThe HAMR has been under development for close to a decade, but its ability to swim or dive is relatively new. The robot may be inspired by cockroaches, but its ability to walk on water welches patterned on the diving beetle, which has flaps and legs working in tandem to generate locomotion. The robotic motion resembles paddling, with the ability to move in any direction, sink, or walk on land.One of the teams major goals was to reduce the number of actuators used in the bots. Those parts are fine in large robots but present a major limitation in microrobots.In actual robots, actuators act like muscles but they a re denser, Chen said. Microrobots dont have the density or power capability. To replace the actuators, the team connected the flaps and legs with a passive joint, which helps define the motion of the leg.When moving across water, the microrobot slows down its leg movement to generate the best possible motion. The kinematic outcome is similar to that of a diving beetles active flaps, Chen said. When the microrobot gets on the ground, the flaps turn inactive and the leg movement intensifies.The microrobot weighs 1.6 g, a little less than a jelly bean, and can move across water at 8 cm per second and hit a top speed of about 50 cm per second on land. By comparison, a real cockroach can sprint at a top speed of about 80 cm per second or 1.7 miles per hour. For now, the robot has to be tethered to an amplifier for power.Another challenge the roboticists faced was finding the right water-resistant material for the bot. During their experiments, the researchers insulated components such as wires and the control board with a coat of Parylene, a polymer. They are now exploring other materials, like Teflon, to improve water resistance.The team still has to improve the roachbots power, control and sensing mechanisms before its ready for real-life rescue missions, which wont be for about five years, Chen said.In emergencies, hopefully we can send in a swarm of these and search for survivors, he said. We need microrobots to navigate complex environments.Listen to Episode 2 of ASME TechCast How Engineers Close Communication Gaps with Non-engineersIn emergencies, hopefully we can send in a swarm of these and search for survivors.Kevin Chen, Harvard University